| TAA50/220 - Bus Information/Telematics Transmitter |
 |
|
- Operating frequencies: 181MHz or 188MHz
- UK Official OFCOM licenced channel @ 188.175MHz
- Output Power: 10mW to 50mW recommended
- Local Oscillator: PLL controlled 2.5ppm -30 to +707°C
- Antenna Connector SMA (others to order)
- Enclosure: 100% EMC screened plated steel
- CPU: On-board RISC with FLASH & RAM
- On-board brown-out protected
- Watchdog timer protected
- Interface: Optically isolated - emulated RS232 via male
- D-type connector with transmit OK local feedback.
- Radio Standards EN-300-220-1, MPT1327, EN-300-113
- Firmware: RTcomTM- Bus Information Protocol or RTIG
- on-air baud rate 1200 FFSK or 2400 FFSK
- Operating Voltage 10.5 to 30V dc
more
|
| Bus Priority 8-Relay Receiver |
 |
|
- Operating frequencies: 181MHz or 188MHz
- UK Official OFCOM licenced channel @ 188.175MHz
- I.F. Frequencies 1st = 45MHz, 2nd = 455KHz
- Local Oscillator: PLL controlled 2.5ppm -30 to +70°C
- Antenna Connector SMA (others to order)
- Enclosure: 3U Eurocard open rack card, RF 100% EMC
- screened plated steel
- Dual CPU: On-board RISK with FLASH & RAM
- On-board brown-out protected
- Watchdog timer protected
- Relay Interface: 8 x Chanegover relays 100V ac 0.5A
- EMC: Exceeds EN-300-220-3, EN60950
- Firmware: RTcomTM- Bus Information Protocol or RTIG
- on-air baud rate 1200 FFSK or 2400 FFSK
- Operating Voltage 10.5 to 30V dc. 5V dc to special order
more
|
| TAA50/220- Bus Information/ Telematics Serial Receiver |
 |
|
- Operating frequencies: 181MHz or 188 MHz
- UK Official OFCOM licenced channel @ 188.175MHz
- I.F. Frequencies 1st = 45MHz, 2nd = 455KHz
- Local Oscillator: PLL controlled 2.5ppm -30 to +70°C
- Antenna Connector SMA (others to order)
- Enclosure: 100% EMC screened plated steel
- CPU: On-board RISK with FLASH & RAM
- On-board brown-out protected
- Watchdog timer protected
- Interface: Optically isolated - emulated RS232 via male
- D-type connector
- EMC: Exceeds EN-300-220-3, EN60950
- Firmware: RTcomTM- Bus Information Protocol or RTIG
- on-air baud rate 1200 FFSK or 2400 FFSK
- Operating Voltage 10.5 to 30V dc. 5V dc to special order
more
|